|
|
|
Description
The Gigabit
10/100/1000 Base-T Converter provide the
10/100/1000 Base-T convert to 1000
Base-SX/LX. When Auto-nogotiation function
is selected both terminal units communcate
each other by full-duplex or half-duplex way
automatically according to specific network
needs. And LED indicators to easily monitor
faults happening during its operation. Auto
MDI/MDIX for RJ45 connector and you dont
need to change the straight through or
crossover cable when you connection to the
network. |
Specification
 Interface:RJ-45
connector,using UTP 100-ohm Cat 5 or 5e
cable, SC/LC or Bi-directional SC (single
mode only) fiber connectors
Cable
Type:50/125 or 62.5/125 Multi-Mode 850nm(SX)
550m 9/125 single-mode 1310nm/1550nm(LX)
10KM~40KM longer ditance upon request
Cable length:UTP cable 100 meters
Technique:Baseband
Standard:IEEE 802.3
10Base-T,IEEE 802.3u 100Base-TX/FX,IEEE 802.3ab 1000Base-T and 802.3z
1000Base-SX/LX
Temperature:0 C to 60 C
degree (Standard Operating)
Humidity:10%
to 90%(non-condensing)
Dimensions:4.2"x2.2"x0.8"
External
Power Supply: Input rating:110 or 220 VAC,
50-60 Hz Output rating: 5 VDC, 1Amp |
Features
MDI-MDIX auto-crossover
supported Plug-and-play installation
Supports jumbo frame (64-9216 bytes)
Supports voltage monitor
Complies to
IEEE802.3z 1000 base-SX/LX and IEEE 802.3ab
1000 base-T
LED indication: power, TP
act, FDX, TP link, fiber link, fiber act
|
|
|
|
Fibre Solution
